Mit-ivy yndustrymetaal Advanced Acryl Latex Sealing Primer mei poerbêste penetrerende krêft
Oanfraach
It hat poerbêste hechting oan stielen substraten en ferlykbere wetterbasis primers, en poerbêste fysike en meganyske eigenskippen nei't de lakweach opdroogt.
5. De fervefilm hat poerbêst ljochtbehâld en kleurbehâld nei it droegjen.
Oanrikkemandearre tapassing It is geskikt foar ôfwetteringsbeskerming fan frachtweinen, masjine-ûnderdielen, lichte yndustriële apparatuer, ensfh., Wêr't hege beskerming nedich is.
Technyske gegevens Kleur assorteare
Oerflak droech (50% mingberens) 15 ℃ C <1h ； 25'C <0,5h
Fêste droech (50% fochtigens) 15'C <48h; 25 ° C <24 oere
Hits "kg.cm" 50
Wetter (50 ± 5μm) 72h fervefilm blaast net, helpt net te fallen, net roest.
Hurdens 0,3 (dûbele slinger) meganyske eigendom testen filmdikte (23 ± 3jμm)
Adhesje (Hegeliaansk) nivo 1
Oerflakbehanneling It oerflak fan it bedekte materiaal moat frij wêze fan focht, oalje, soere koalstof en jiske.
Fluch details
Stiel mei oksidehûd: sjitstralen of sânstralingsmetoaden lykas ferwurkjen nei Sa2.5-nivo, wêr't sânstralen net kin wurde meganysk oppoetst wurde of
Gemysk behannele om alle driuwende brutsen skouders te ferwiderjen.
Stiel sûnder oksidehûd: sânstraald (sjitblast) nei Sa2.5 as loft-aktiveare, elektryske slyp ark nei St3.
Lassen, flamsnije of fjoerwurk korreksje fan ferbaarnde bôge gebieten: slypje nei St3 nivo.
Basismateriaal mei âlde fervefilm: ferwiderje âlde fervedeeltjes en roest, en sân nei St3 mei loft- of elektryske skuurmiddels.
Typysk skilderpakket kin brûkt wurde mei H902 primer op basis fan wetter, of allinich brûkt wurde as in algemiene dekorative topcoat, of brûkt wurde mei oare soarten primerprodukten (moatte wurde oanpast foar ferifikaasje).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
